SLA(Stereolithography) ose fa'aopoopo fa'agasologa o gaosiga e galue e ala i le fa'asa'oina o se leisa UV i luga o se fagu o le resini photopolymer. Faatasi ai ma le fesoasoani a le komipiuta fesoasoani gaosiga poʻo le komepiuta fesoasoani mamanu (CAM/CAD) polokalama, o le UV laser e faʻaaogaina e tusi ai se ata na muaʻi faʻapipiʻiina poʻo se foliga i luga o le ata o le photopolymer vat. Photopolymers e maʻaleʻale i le malamalama ultraviolet, o lea o le resin e faʻamaʻaʻaina photochemically ma fausia ai se tasi vaega o le mea manaʻomia 3D. O lenei faiga e toe fai mo vaega ta'itasi o le mamanu seia mae'a le mea 3D.
E mafai e CARMANHAAS ona ofoina atu i tagata fa'atau le masini fa'apitoa e aofia ai le vave Galvanometer Scanner ma le F-THETA mata tioata, Beam expander, Mirror, etc.
355nm Galvo Scanner Ulu
| Fa'ata'ita'iga | PSH14-H | PSH20-H | PSH30-H |
| Suavai malulu/faamaufa'ailoga ulu su'esu'e | ioe | ioe | ioe |
| Avanoa (mm) | 14 | 20 | 30 |
| Matagofie Su'ega Su'ega | ±10° | ±10° | ±10° |
| Su'e Sese | 0.19 ms | 0.28ms | 0.45ms |
| Laasaga Taimi Tali (1% o le fua atoa) | ≤ 0.4 ms | ≤ 0.6 ms | ≤ 0.9 ms |
| Saosaoa masani | |||
| Tulaga/oso | <15 m/s | <12 m/s | <9 m/s |
| Su'ega laina/fa'ailoga raster | <10 m/s | <7 m/s | <4 m/s |
| Fa'ata'ita'iga fa'ata'ita'i | <4 m/s | <3 m/s | <2 m/s |
| Lelei lelei Tusitusi | 700 cps | 450 cps | 260 cps |
| Tulaga maualuga o tusitusiga | 550 cps | 320 cps | 180 cps |
| Sa'o | |||
| Linearity | 99.9% | 99.9% | 99.9% |
| I'ugafono | ≤ 1 urad | ≤ 1 urad | ≤ 1 urad |
| Toe fai | ≤ 2 urad | ≤ 2 urad | ≤ 2 urad |
| Temperature Drift | |||
| Offset Drift | ≤ 3 urad/℃ | ≤ 3 urad/℃ | ≤ 3 urad/℃ |
| Qver 8itula Umi-Taimi Offset Fa'ase'e (Ina ua uma le 15 minute lapata'iga) | ≤ 30 urad | ≤ 30 urad | ≤ 30 urad |
| Fa'agaioiga Temperature Ranga | 25℃±10℃ | 25℃±10℃ | 25℃±10℃ |
| Fa'ailoga Fa'ailoga | Analog: ±10V Numera: XY2-100 protocol | Analog: ±10V Numera: XY2-100 protocol | Analog: ±10V Numera: XY2-100 protocol |
| Manaomia Malosiaga Ulufale (DC) | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS | ±15V@ 4A Max RMS |
355nm F-Theta tioata
| Fa'amatalaga Vaega | Umi Fa'atatau (mm) | Va'aiga Fa'afanua (mm) | Max Ulufale A'oga (mm) | Mamao galue(mm) | Fa'amauina filo |
| SL-355-360-580 | 580 | 360x360 | 16 | 660 | M85x1 |
| SL-355-520-750 | 750 | 520x520 | 10 | 824.4 | M85x1 |
| SL-355-610-840-(15CA) | 840 | 610x610 | 15 | 910 | M85x1 |
| SL-355-800-1090-(18CA) | 1090 | 800x800 | 18 | 1193 | M85x1 |
355nm Beam Expander
| Fa'amatalaga Vaega | Fa'alautele fua faatatau | Ulufale CA (mm) | Tuuina atu CA (mm) | Fale Dia(mm) | Fale Umi(mm) | Fa'amauina filo |
| BE3-355-D30:84.5-3x-A(M30*1-M43*0.5) | 3X | 10 | 33 | 46 | 84.5 | M30*1-M43*0.5 |
| BE3-355-D33:84.5-5x-A(M30*1-M43*0.5) | 5X | 10 | 33 | 46 | 84.5 | M30*1-M43*0.5 |
| BE3-355-D33:80.3-7x-A(M30*1-M43*0.5) | 7X | 10 | 33 | 46 | 80.3 | M30*1-M43*0.5 |
| BE3-355-D30:90-8x-A(M30*1-M43*0.5) | 8X | 10 | 33 | 46 | 90.0 | M30*1-M43*0.5 |
| BE3-355-D30:72-10x-A(M30*1-M43*0.5) | 10X | 10 | 33 | 46 | 72.0 | M30*1-M43*0.5 |
355nm Fa'ata
| Fa'amatalaga Vaega | Diamita(mm) | Mafiafia(mm) | Ufiufi |
| 355 Faata | 30 | 3 | HR@355nm,45° AOI |
| 355 Faata | 20 | 5 | HR@355nm,45° AOI |
| 355 Faata | 30 | 5 | HR@355nm,45° AOI |
